Jade Tree Bonsai Care Ultimate Guide


A Caveat and Affiliates

First off, a little caveat: within my articles you will find affiliate links, meaning if you buy them, I get a small commission. Your cost is not affected. In addition, I am an Amazon Associate and I earn from qualifying purchases on Amazon.

And yes, if I say that I recommend a product here, it means I truly believe it is a good product. I refuse to recommend any product that I have not researched and believe to be a good value.

Even better, I provide you with a very clear picture of the product, it’s use, and the probable value.

Earning your trust is important to me. I run this website myself and the commissions and donations help support the site.

Sound reasonable and fair enough? Let’s continue to the article.


Ultimate Guide to Jade Tree Bonsai

The Jade Tree Bonsai is a native plant of South Africa, and it is an evergreen easy-care bonsai. You should never keep this plant in temperatures below 50° F. The jade tree has a thick trunk with a dense branch structure. Its oval leaves develop red edges when we provide sufficient sunlight to this plant. This bonsai tree produces excellent star-shaped white blooms in the fall. The leaf’s standard size is 1-2″. If it is pruned regularly,  you can maintain it to stay as small as ½” . The jade tree is particularly suitable for informal, straight, and clump styled in all sizes.



Jade bonsai tree Portulacaria afra. On rustic wood stock images
  • facebook
  • twitter
  • pinterest




Direct Sunlight for Jade Tree Bonsai


Jade Bonsai Tree plants need easy-care bonsai. , in any event, 4 hours of direct daylight every day. Youthful plants ought to be kept in splendid, roundabout sunlight. Enormous, grounded jade plants can deal with more direct sun. Kitchens and workplaces with a southbound window are ordinarily great spots with barely enough light, as are western-confronting windows.


Coffee Grounds for Jade Tree Bonsai

Jade plants are quite possibly the most well-known espresso consumers, and watering with cold-prepared espresso will help keep the leaves’ full dull green appearance and help thicken the stems. It will help forestall your jade plant, dropping leaves.


Leaves Falling Off

Jade leaves could fall rashly from being excessively wet or excessively dry, for the absence of nitrogen in the dirt or the need for more daylight. Regularly mealybug’s assault this delicious. Eliminate them by hand, utilizing a q-tip dunked in liquor; rehash treatment once every week until there are no more bugs.


The Life Span of Jade Tree Bonsai

Even though they don’t grow, they can live for at any rate 70 to 100 years, giving it a lot of time to develop into a great example.




This specific tree is an excellent choice for both high and low light environments because this tree is a great bonsai choice due to its low maintenance. You can grow it outdoors in warm temperatures above 50, but this is not recommended because it best grows indoors where it gets plenty of water and natural sunlight. The long, shortening stretches of fall trigger the Jade to create lovely sprouts around late September to early October.



It is essential to identify between not enough water and too much water, even though it is a lot tricky. The leaves of the Jade tree are exceptional in that they hold water of whatever amount they need. Water the Jade only appropriately and allow the soil to dry the next time you water it. In the months of the winter season, only water it every two to three weeks. Keep in mind that you must saturate it thoroughly and deeply when water is needed and let it catch its breath before the next time you pour water into it.

An old and traditional watering technique for the jade tree bonsai care is to put the pot or container in a sink or hold of water maximum of one or two inches drowned and let the water be absorbed in the soil from the bottom of the box through the drainage holes the pot has. One can also lift it to see if it needs water or not; this is another favorite way to know. You can get a sense of whether it needs watering or not by knowing its weight.

However, moisture meters are available to measure the moisture, and it takes the guesswork out. But they are somewhat expensive, but helpful too at the same time. Bear in mind to water it slowly to let it absorb the water in the dirt; otherwise, water can spill all over your table. Mist it every once in a while with a spray bottle too. It helps the plant to take the extra burden off the roots, mainly when it is hot and dry outside. We put our bonsai tree in a pot specifically made to drain well, so it is almost impossible to overwater the tree.




The jade tree leaves need moistness so that they can be green and vigorous. The air is dehydrated anytime your tree is classified. Spray frequently during the day, and try not to put your Bonsai near a draft or exhaust because it dries out the shrubbery. A humidity tray can be used because it is a great technique to increase humidity. These surfaced trays filled with little stones have water in the bottom of the tray. We must make sure that the water does not reach the bottom of the Bonsai container. As the water evaporates, it gives a moist environment to the plant.



Fertilizing the bonsai tree is necessary because the nutrients in its soil leave very quickly as the water flows. It grows in the spring season, and it is an excellent time to start fertilizing the tree. The Jade is very sensitive and needs a balanced amount of fertilizer to grow strongly. Make sure to use the chemical fertilizer diluted to one-half strength or use organic liquid nourishment. You should fertilize it every 14 days during the spring season and a maximum of once a month during the winter season. Jade responds quickly and very actively to fertilizers, so make sure not to skip it.



These are the steps you should follow while trimming your jade bonsai plant.

  • Trim a little, ragged jade bonsai into a tree shape by eliminating branches and leaves that can mess up the structure you want. Study the plant and see the completed tree; stop development that doesn’t follow format. When you cut little branches, make the cuts flush along the fundamental branch or trunk. Try not to leave an unattractive stub, and don’t make a hollow cut that makes an emptiness where decay can set in.
  • Characterize the stems you wish to form into bonsai branches by nipping off leaves and leaf buds along the stems. Permit different leaves to develop at the tips as humble foliage and trim off leaves along the branch. Monotonous managing creates denser leaf buds after some time for a more tree-like appearance. Clip the terminal bud of a curiously large branch to restrict its length and power side expanding.
  • Permit pieces to air dry and callus over normally. Pruning sealants are a bit much with Jade – fixed cuts make conditions for decay infections to create.
  • Eliminate cut branches and leaves cautiously from the inside pieces of the jade bonsai with long tweezers. Utilizing tweezers rather than your hands gives you better permeability and better control working in the little spaces.
  • Trim your jade bonsai week after week, depending on the situation. Continuous managing helps keep the foliage less.



Jade grows very slow. It can proceeds up to 20 years to be a three-foot-tall tree. We have to pinch back the new growth to get healthy growth near the bottom of the tree. There is one of the species that do well with stalk reduction. Its wounds recover in almost two to three weeks. Make cuts flat, not hollow, when removing twigs or divisions. Try not to cut deep because it leaves undesired scars. You do not have to seal the cuts. Keep in mind that you should allow the soil to dry before you remove heavy roots or branches.

Follow this step-by-step guide for better understanding:
  • Prune awkward branches with bonsai pruners/sharp-directed scissors towards accomplishing a tree system. Do this in stages, and permit the plant to fill in with new development between prunings so you can more readily visualize the state of the developed Bonsai. Eliminate enormous leaves to open the plant and permit light to arrive at internal stems where you need new, more modest leaves to grow. Pruning cuts ought to be flush with the primary branch so they can shape a smooth callus. Both remains and scooped-out wounds create conditions for stem rot poison.
  • Trim jade more than once per week to control the size and thickness of the leaf buds. Squeeze off larger than average leaves, or squeeze off leaf buds filling in undesirable spots, for example, on the lower trunk of the plant. Nip the tips of leggy branches to support a bunch of new leaf buds to create. Long tweezers make it simple to reach inside the plant to eliminate pruned bits.
  • Try not to use wound sealant. Let pruned zones air dry and structure a callus. Microorganisms caught under sealant can cause bacterial or contagious decay. Clean the pruning shaper cutting edges with scouring liquor after each slice to forestall the spread of sickness, particularly on the off chance that you utilize similar apparatuses with a few plants.
  • Train longer branches into fascinating setups by tenderly winding copper wire around each branch you need to control. Cautiously twist the branch on more than one occasion per week in little augmentations, pushing it into the ideal shape. Jade reacts rapidly to wiring and can keep up its new structure in just three weeks. If the wire leaves little engravings where it reached the branch, the imprints ordinarily vanish as water renews the branch after the wire is eliminated.



Wiring techniques are used to train the tree into different shapes and styles perfectly. Just make sure to use the thinnest training wire if you want to hold the branches in your desired position and style. Do not wire the tree right after repotting. Wind the preparation wire toward the path the stem is bowed to hold the wire back from relaxing. If you stick the wire too tightly, it will leave scars so only wrap the wire to get the desired job done.


For good results, wrap the wire around the trunk and anchor slowly, starting from the bonsai tree base, and continue along the specific branch you want to train. Repeat the same process if needed and keep revising it. Jade trees respond quickly to wiring, and you can see the results within three weeks. After about three to six weeks, the branch should maintain the shape on its own, and then you can remove the wire. Do not unwind the wire because it will leave unwanted scars and can cause the wire to break. So you have to CUT THE WIRE carefully from the branches.



One should repot the jade bonsai after every two years in the spring season using an essential soil mix to see it grow healthy. For good measure, you should try to move Jade’s roots, soil ball in one piece and put it in the new pot, which should be of the same shape.

After repotting, water the bonsai jade thoroughly and place it in a shady location for several weeks to help the roots grow.


Insects and Diseases

Some insects are aphids, spider mites, scale, and root aphids which are common bonsai pests. Mealybugs or rotting roots often affect indoor kept Jades. Jades that grown outdoors are specifically susceptible to aphids.  You can shun them by using insecticides and fungicides in the form of sprays, soapy rinses, or systemic poisons. We recommend you spray the jade trees once every month or two with a non-toxic insect spray. You should rinse off soaps the very next day. The insecticides will remain on the surface and will not be absorbed in the soil so you should not spray when the soil is dry. Mealybugs look like white cottony areas at the leaf base with some infiltrations that appear mainly on the roots.

Furthermore, you can only see these infestations while repotting. If it is poorly drained or overwatered, or underwater, the soil can damage the roots. And the root rot fungi enter the roots from those wounds and cause the roots to rot. And there is no chemical treatment for it yet. Moreover, we must remove all affected roots and growth and sterilize the pot and repot the tree using fresh soil to avoid re-infecting the Jade.



In the wake of learning these deductively demonstrated Jade Plant Benefits, you’ll discover that developing it inside can make you sound and affluent.


  • It Improves Indoor Air Quality.
  • It Increases Humidity.
  • A Good Luck Symbol.
  • Simple to Maintain.
  • Restorative Properties of Jade Plant.
  • It Adds a Touch Of Beauty.
  • It Absorbs CO2 in the Night.


Read more



Submit a Comment

Your email address will not be published.

Great gift idea!

Bonsai Trees

Affiliate Disclosure

This website contains affiliate links. Any purchases made through such links will result in a small commission for me (at no extra cost for you). I use these commissions to help maintain this site to provide helpful information to you.



error: Content is protected !!
sun-loving houseplants

Join the HousePlantJoy Newsletter

You will receive our newsletter and updates.

We promise to only deliver quality information to you with NO spam.

We never sell or distribute your information!

You have Successfully Subscribed!

Pin It on Pinterest